|
|
|
|
PIC Microcontrollers
Introduction
At University we have a lab called the Microchip Lab, ironically sponsored by Microchip. In there we have everything we need at our disposal, ICD2's, Explorer 16 board's, PICDEM2 Plus boards, signal generators, oscilloscopes, soldering equipment... you get the idea.
The aim of this section is to let you get to grips with programming PIC microcontrollers, desiging schematics and PCB production, in a similar way to how we were taught.
Use the table below to select the relevent section:
| 1: Setup | 2: Project Setup | 3: Your first program |
| 4: Using ADC | 5: Using PWM | 6: Using I2C |
| 7: Using RS-232 | 8: Basic Circuit | 9: Breadboard Circuit |
| 10: PCB Fabrication |
